 |
ALL SEATS ARE MADE TO ORDER
Please see Technical Specs and Images for options
*HARDWARE IS INCLUDED ( ONLY TAKES 1 BOLT or Stud)* *Black powdercoated mounting bracket is also included. *
PAINTABLE BACK CAFE SEATS MUST BE SANDED AND PRIMED JUST LIKE ANY OTHER PAINT JOB
*PLEASE NOTE - WILL NOT FIT ALL SPORTSTER MODELS* SHOULD FIT 04-Present SPORTSTER'S with Stock SMALL tank, will not fit with large tank.
On years 07,08,09 ECU can be relocated under the front of the seat, we designed the seat with a relief in the bottom for this reason.
-Longer shocks will be required. (14"-15" recommended) -HOOP NOT REQUIRED BUT ALWAYS RECOMMENDED. -Our STANDARD 1" Cafe hoop works well with this seat if spread open to match your frame width. -Requires removal of rear fender and relocation of some electrics, signals, brake light etc. -Removal of struts and longer shocks recommended. -ECU relocation is simple (some models) with some zip ties and ECU placed under the front of the seat. *PLEASE SEE IMAGES AND TECH SPECS FOR MORE DETAILS*
- *SHOULD FIT 04-present SPORTSTERS* With stock Small tank
- seat mounting hardware is included with the seat
-Longer shocks will be required. (14"-15" recommended) -HOOP NOT REQUIRED BUT ALWAYS RECOMMENDED. -Our STANDARD 1" Cafe hoop works well with this seat if spread open to match your frame width. -Requires removal of rear fender and relocation of some electrics, signals, brake light etc. -Removal of struts and longer shocks recommended. -ECU relocation is simple (some models) with some zip ties and ECU placed under the front of the seat.
MEASUREMENTS ABOUT 6" WIDE AT TANK ABOUT 10" AT WIDEST POINT ABOUT 24" LONG HUMP IS ABOUT 5" TALL
PAINTABLE BACK CAFE SEATS MUST BE SANDED AND PRIMED JUST LIKE ANY OTHER PAINT JOB
|
|
 |