 |
***now available in 1" or 7/8" OD tube*** FREE SHIPPING (Within continental USA only)
Our TUFFSIDE cafe seat frame hoop was specifically designed to fit our line of cafe seats! (may fit other brands too) Designed to fit the cafe seat "V" shape better than a standard "U" shaped hoop. 7/8" hoop will fit inside cafe seat, 1" will be as wide as seat. Measures about 12" long, and about 8" center to center.
After you have trimmed the hoop and frame simply weld the hoop on an upward angle to match the slight angle to the back of our seat. (Frame slugs not required on cafe seats as the rear of the seat is not going to be used for sitting)
7/8" hoop May fit inside your 1" stock frame tubing! No need for Slugs! (some bikes only) *7/8" Pictured on a CB550 frame that will use a Tuffside Flat seat* *Cafe seats may require hoop welded on a slight upward angle*
- 7/8" OD hoop May fit inside your 1" stock frame tubing! No need for Slugs! (some bikes only)
*Pictured on a CB550 frame, that will use a Tuffside Flat seat* *Cafe seats may require hoop welded on a slight upward angle*
|
|
 |