CLICK IMAGE FOR MORE INFO
Universal hoops are a "starting point" for your build only. May need to be cut, bent, modified etc.. to fit your project.
Tuffside "universal" frame hoop that measures about 26" long (total), and about 7-1/2 center to center.
Available in 1" OD .095" wall DOM tubing OR 7/8" OD .095" wall DOM tubing.
You can spread the hoop open or closed a bit to fit your project by standing on one side and pulling the other (if your strong enough), or putting it in a vise and prying it open or closed with another piece of tubing for leverage.
This will fit our flat seats just about perfectly - but depending on your frame width some modification may be needed.
These hoops are designed to replace your stock top frame tubes - you can cut the excess off the front, bend them up, in, out whatever you need for your custom project.
As with ALL custom products these are not meant to "FIT YOUR BIKE" some modification will be required